Electrostatic elimination device types and maintenance methods

Type of static elimination device Handheld contact: Handheld contact static elimination device refers to the user's handheld device and live body contact, in the instant of contact will eliminate static electricity on the live body

 

Electrostatic elimination device type

Handheld contact: The handheld contact electrostatic eliminator refers to the user's handheld device and contact, in the instant of contact will eliminate static electricity on the live body.

Charged body
Full automatic: Full automatic static eliminator means that people carry around, and then the equipment will automatically sense the surrounding static electricity and eliminate static electricity wherever people go. No need for equipment to contact other features.

Ion wind gun: ion wind gun, which uses strong ion wind to remove static electricity and foreign matter, dust on the surface of the object, belongs to the industrial class. The appearance is suitable for manual electrostatic removal. Need to use a high voltage generator
Ion air gun product features:

1: lightweight, durable plastic manufacturing, used to remove electric dust.
2: With air strengthening function
Ion wind gun product use:
1: Remove electricity and dust from the products formed by plastic pressing.
2: For cars, ships, FRP, woodworking furniture, various plywood, makeup board and other wide products in addition to electricity, dust removal.

Static elimination device maintenance method

1, power supply, air source requirements ① Power supply must have ground, and to ensure that fully grounded. The transformer must be well grounded, and check whether the grounding wire knob is tightened before each use. ② The air source used must be effectively filtered. Sometimes a secondary filtration device is required. The filter should be cleaned in time. Otherwise: Particles of water, oil and dust/dust can enter the ion generating chamber and attach to the inner wall of the plastic part. When it accumulates enough, the ion needle ignites it. Results Honeycomb coke damage was gradually formed in plastic parts, and the ion exclusion was gradually reduced. In particular, security risks arise.

2, in addition to electrostatic effect adjustment ① In addition to electrostatic effect in addition to electrostatic time and air pressure is inversely proportional. The air pressure should be 0.3Mpa-0.7Mpa. ② The distance and Angle between the gun head, the nozzle head and the electrostatic field affect the electrostatic effect, and attention should be paid to debugging until satisfactory.

3, daily maintenance ① Wind gun/nozzle is easy to break. Pay attention to anti-collision when using wind gun, pay attention to anti-fall after use. Even if the air nozzle is fixed, pay attention to prevent collision of objects. ② The air gun pressure regulating valve is moderate and appropriate to enter the universal anti-rust lubricant. ③ Anhydrous alcohol should not be used to clean the ion needle and ion needle chamber. When cleaning, first power off, and then use the camera to unscrew the small plastic cover (also known as the air accelerator) in front of the ion wind gun head, use a cotton swab to wash the ion needle and the ion needle chamber, and clean the internal stains and dirt inside. ④ It is best to add a foot switch to the gas feed of the ion wind gun, or through the solenoid valve and mechanical action linkage regulation, which can not only improve the use effect, but also extend the service life.